FUEL FEED TRANSFER PUMPS WITH PISTON

The feed pumps with piston supply diesel injection pumps with fuel. They are fitted directly on the injection pumps and they are driven the by eccentric cam situated on the camshaft of the injection pump.

The feed pumps are provided with a priming hand pump, which manually activated before the engine starts – removes the air out of the feeding system and fills it with fuel.

The feed pumps made by MEFIN Sinaia are mechanical plunger type single effect ( KS, KE ) or double effect ( KD ), normal construction ( KE ) or narrow construction ( KS ), with or without filter bowl.

The correct choice of the feed pump depends on: injection pump type, fitting place, suction position, pipe section, allowed maximum speed, fuel volume required and maximum allowed volume before the feed pump.

The pump bodies are made of gray cast iron, machined with advanced production methods on highly automated equipment.

Quality control begins with each individual component.

This means that these pumps made by MEFIN Sinaia can satisfy your expectations.

  

MEFIN FEED PUMPS

Technical parameters
Parameters
Measure
Size
A
P
ZW
         
Plunger diameter
mm
22.0
22.0; 24.0
22.0
Maximum pump speed
rpm
3000
3000
1500
Stroke of eccentricity
mm
4,8
4(2x)
12
Maximum absorption height
m
1.0
1.0
1.0
Pre-filter
Filter and not filter
Not filter
Not filter
Type
single-acting piston
double-acting piston
single-acting piston
Pump drive
By eccentric cam fitted on the cam shaft
Pump mounting  
Flange mounting for installing the pump on the injection equipment
Execution  
Gray cast iron housing